Description
PICTURE MAY NOT REPRESENT ACTUAL ITEM FINISH. PLEASE REFER TO PRODUCT DESCRIPTION.
Construction
One piece die-cast, low copper (<0.6% Cu) Aluminum Alloy 360 with vents and .100" minimum wall thickness
Finish: fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) polyester powdercoat
Lens is impact resistant 1/8″ tempered glass with anti-reflective coating
Lens has a one-piece extruded vulcanized silicone gasket
Lens frame one piece die-cast, low copper (<0.6% Cu) Aluminum Alloy 360 and .100" minimum wall thickness
Lens frame has a one-piece O-ring extruded vulcanized silicone gasket
Mid-frame one piece die-cast, low copper (<0.6% Cu) Aluminum Alloy 360 and .100" minimum wall thickness
Mid-frame secures to lens frame and housing by stainless steel recessed Allen-head screws
Silicone gaskets throughout
All external fasteners are stainless steel
Optics
LEDs mount to a metal printed circuit board assembly (MCPCB)
Optical lenses are clear injection molded PMMA acrylic
Installation
Fixtures must be grounded in accordance with national, state and/or local electrical codes
Electrical
Universal voltage, 120 through 277V with a +/- 10% tolerance
Driver is Underwriters Laboratories recognized
Drivers shall have greater than a 0.9 power factor, less than 20% harmonic distortion, and be suitable for operation in -40°C to 40°C ambient environments
Luminaire shall be capable of operating at 100% brightness in a 40°C environment
Both driver and optical array have integral thermal protection that will dim the luminaire upon detection of temperatures in excess of 85°C
Dimming range from 10% to 100% through the use of standard 0-10V interface on the programmable driver
Modular wiring harness in the service area provides user access to the dimming circuitry
Reviews
There are no reviews yet.